Search this Blog

Monday, December 20, 2010

Incoming dial peer,we have to designate that dial peer as SIP?

We are sending SIP invite to a GW. We see it is matching inbound voip dial peer.

The question is do we have to designate that dial peer as SIP?

Our understanding is if protocol is not specified, the dial peer is H.323. It turns out it works for both cases,

dial-peer voice 1 voip
session protocol sipv2
incoming called-number .and

dial-peer voice 1 voip
incoming called-number .

IOS 12.4.15T8

Is this working as designed or by accident?


I don't think you need to configure "session protocol sipv2" on an incoming dial-peer.

The "session protocol" command mostly used for outgoing dial-peer.

From the command reference guide:

"To specify a session protocol for calls between local and remote routers using the packet network, use
the session protocol command in dial peer configuration mode. To reset to the default, use the no form of this command."

Citation - This blog post does not reflect original content from the author. Rather it summarizes content that are relevant to the topic from different sources in the web. The sources might include any online discussion boards, forums, websites and others.

No comments :

Post a Comment

/* Google Analytics begin ----------------------------------------------- */ /* Google Analytics end ----------------------------------------------- */