Friday, July 1, 2011
Cisco 6513 OSM-2OC48/1DPT-SL issue error
My module OSM-2OC48/1DPT-SL on Cisco 6513 issue error any here is my message.
%CONST_DIAG-SP-6-HM_MESSAGE: High traffic/CPU util seen on Module 7 [SP=8%,RP=98%,Traffic=0%]
The Switch processor(SP) sends a Health Monitor (HM) ping packet to the RP in every 15 seconds time interval. On receipt of this ping packet, the RP returns the same packet back to the SP. If the same ping packet is received then this process recurs again 15 seconds later. In the event that either the SP or the RP's CPU utilization exceeds 80%,
this message is printed out and the sending of ping packets are ceased temporarily until CPU drops below 80%.
If you are seeing this message consistently in the logs use sh process cpu on both RP and SP (remote login command) when this occurs. Also check sh ip traffic and sh ip interface for incrementing drops.
Citation - This blog post does not reflect original content from the author. Rather it summarizes content that are relevant to the topic from different sources in the web. The sources might include any online discussion boards, forums, websites and others.