Search this Blog

Monday, October 3, 2011

Cisco Sup720 not able to boot

We are working on Cisco 6505 with Supervisor 720. In the configreg we somehow deleted or corrupted the IOS Image. Now When switch on my Switch its going to Rommon mode. We downloaded image in flash disk(disk0). When we try to boot from that image its giving following error -

rommon 11 > dir disk0:

Initializing ATA monitor library...

Directory of disk0:

2 49141220 -rw- s72033-ipservicesk9-mz.122-33.SXH2.bin


rommon 10 > boot disk0:s72033-ipservicesk9-mz.122-33.SXH2.bin

Loading image, please wait ...

Initializing ATA monitor library...

*** TLB (Load/Fetch) Exception ***

Access address = 0x0

PC = 0x0, Cause = 0x8, Status Reg = 0x30409003

monitor: command "boot" aborted due to exception
  1. This issue can be caused by a software image with a bad checksum. Re-download the Cisco IOS Software image from the TFTP server.
  2. If a re-download does not resolve the issue, format the Flash card and re-download the Cisco IOS Software image.
Please click here for documentation from Cisco on Trouble shooting issues on CAT 6500 / 6000.

Citation - This blog post does not reflect original content from the author. Rather it summarizes content that are relevant to the topic from different sources in the web. The sources might include any online discussion boards, forums, websites and others.

No comments :

Post a Comment

/* Google Analytics begin ----------------------------------------------- */ /* Google Analytics end ----------------------------------------------- */