We are moving from peer-to-peer to Client-Server. We are installing MS Small Business Server 2011 that needs to provide DHCP services: How do you disable 1841 DHCP server using SDM ?
Help file reads: "...click Additional Tasks on the Cisco SDM category bar, click DHCP, and configure..." but Additional Tasks button is inop.
Router ip = 192.168.1.1, SBS server ip = 192.168.1.2
In SDM you can enter CLI commands and they will be sent to the router. Please click here for more information on SDM configuration.
To disable DHCP the CLI command is: no service dhcp.
Also you can specify the IP address of the server that will be using as the DHCP server. Go to the interface that you will be connecting your clients and type:
config-if)# ip helper-address 192.168.1.2
Where 192.168.1.2 is the DHCP server.
Citation - This blog post does not reflect original content from the author. Rather it summarizes content that are relevant to the topic from different sources in the web. The sources might include any online discussion boards, forums, websites and others.